對于一些大型醫療機箱比一般的設備要貴一點，其體積很大的。一旦出現問題的話，其在維修起來也是很費事的。所以我們要做好保養是很重要的呢。但是如果出現一些問題的話，也是不要緊的，下面濟南機箱外殼廠家小編就簡單為大家介紹一下。

For some large medical cases, they are a bit more expensive than ordinary devices and have a large volume. Once a problem occurs, it is also very difficult to repair. So it's important for us to do a good job of maintenance. But if there are any problems, it's not important. Below, the editor from Jinan chassis shell manufacturer will briefly introduce them to you.

1、一般普通的設備，要隨壞隨修。總結幾年來的醫療器械加工與修補實踐，在接到儀器后，先剖析缺點現象，判定缺點來歷，然后選用必定查驗方法，逐級剖析查驗，判定缺點元件的修補或替換。

1. Ordinary equipment should be repaired as needed. Summarize the practice of medical device processing and repair over the past few years. After receiving the instrument, first analyze the defect phenomenon, determine the origin of the defect, and then select a certain inspection method to analyze and inspect step by step, and determine the repair or replacement of defective components.

2、一般其急救設備，有必要急修，活絡清掃缺點。由于各搶救設備利用率不高，放置時間長，選用保養修補的方法，守時檢查。由于各科室的急救設備，沒有專人保養，在有患者需求搶救時，儀器常常運用不靈。

2. Generally, its first aid equipment requires urgent repair and active cleaning. Due to the low utilization rate and long storage time of various rescue equipment, maintenance and repair methods were chosen, and timely inspections were carried out. Due to the lack of dedicated personnel to maintain the emergency equipment in various departments, the instruments often fail to function properly when patients need to be rescued.

一方面，由于儀器不常運用，長期堆集塵土，構成線路短路而損壞。另一方面，運用人員的操作失誤構成機器缺點。因此，除了守時檢查外，各科室的搶救設備有必要有專人保養。

On the one hand, due to the infrequent use of instruments, dust accumulates for a long time, resulting in circuit short circuits and damage. On the other hand, operational errors by operators constitute machine defects. Therefore, in addition to punctual inspections, it is necessary to have dedicated personnel maintain the rescue equipment in each department.

3、一般其大型醫療機箱設備 ，有必要選用預防性的修補方法。即對儀器設備進行正常的保養，才調運用更耐久，這就要求醫療器械加工與修補的作業人員應按方案守時或不守時地對設備進行必要的查驗，調整加油，替換易損元件等保護作業。以避免設備因部分小缺點損壞更名貴的部件。

3. Generally, it is necessary to choose preventive repair methods for large medical chassis equipment. Only by performing normal maintenance on instruments and equipment can they be adjusted for more durable use. This requires medical device processing and repair operators to conduct necessary inspections, adjustments, refueling, replacement of vulnerable components, and other protective operations according to the plan on time or not. To avoid equipment damage to more expensive components due to some minor defects.

4、一般其高危設備，即高風險設備，有必要對醫療器械加工操作人員進行操練查核，嚴峻按操作規程操作，有必要檢查現在狀況是否作業正常，要有專人處理。

4. Generally, for high-risk equipment, that is, high-risk equipment, it is necessary to conduct training and inspection on medical device processing operators, strictly follow operating procedures, and check whether the current condition is normal. It is necessary to have a dedicated person handle it.

對于一些大型醫療機箱外殼維護和保養相關事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.xtgs.com.cn咨詢！

That's all for the maintenance and upkeep of some large medical chassis casings. I hope it can be helpful to you. For more information, please come to our website http://www.xtgs.com.cn consulting service